Search results

Where on this site would you recommend. Thanks

Got it. Thanks.

Thanks. How many volts do you think at the injectors are needed to make them fire while cranking?

The plugs were not getting fuel so I removed the injectors with the fuel rail attached and attached a nine volt battery to the injectors and they fire. The injector ground is attached to the ECU and the hot wire to the battery. The ECU ground pulse tells the injectors to fire. When I connect a...

I didn't do the swap but it worked great then the clutch blew and it sat around in Florida weather now trans but npc start. Injector4s are working and they are getting fuel but not firing. A noid test says the eco is putting out a pulse but they'r not firing. Can't fight it out. Here 's a pic of...

Thanks for the advice.

Thanks for looking into this for me. I'm reading 12.08 volts at the injector harness. I'll double check it and get back to you.

Great. Thanks!

Great. Thanks.

Good one!

I have a 1973 Lotus Europa with a 1998 Integra GSR VTEC. No Start. The fuel injectors are not spraying. Here is what's going on. - The Noid light is flashing which tells me ECU is good - Continuity is good between ECU and harness - Resistance is good between ECU and harness - Spark plugs are new...