Search results

I've had no issues except disconnecting once on a long drive. Probably some interference.

You could be right. I also wanted the "hold lock to roll up windows" feature, so I got the module. I'm not certain if the auto-folding on lock would work without the module though. You could always email mikstore and ask!

Whenever the car locks. You would have to also get the can-bus adapter.

I tried the trial, was pretty good. Unfortunately, I had already installed the Accord Autodimming/Homelink mirror prior to the trial, so I didn't need it.

I spent the most time in removing the colored trims lmao

That looks like the new kit F that I got with the reduced amount of wiring. But yes, same thing after install. Guess he didn't want to try it lol

Ok nvm lool. Apparently "off lock" is the "lock" button 😂

Omg thanks lmao. I thought I screwed something up. What's the "off lock" button? I turned the horn off but can't figure out how to turn the hazards off

So I'm having this issue after the install where the car honks once when locking and twice when unlocking. Also, the hazards go off for 16 blinks when I open the door.. I'm wondering if this is due to the auto folding or the tilt on reverse.. ugh

1. Yes, no depin/repin! 2. Yes 3. You know, that's a good question. I haven't tried. I'll ask mikstore about this.

Just finished the install! The new kit is plug and play. I did this on top of the auto-folding mirror as well. For the tiny controller, I also did what @akoza did and tapped off the reverse (green) and ground (black) of the existing mirror connector. Setting it up is a bit weird since controls...

OK! After much trials and tribulations, I have finally finished the install of Mikstore Auto-folding Kit Model F, Flowing side mirror LEDs, and Auto-tilt on reverse. First mirror took me like 4 hours (don't laugh), but the second mirror took me 30 minutes. I'll have info about the Auto-tilt on...

@akoza Did your kit look like this? Seems all 14 pins are used? I wonder if my kit is different.

I actually figured that out just now. Thanks!

I did! Figured it out, thanks. What do I do with the ends of the white and black wires? I pinned the green from white to gray . Then the two wires into the gray and now they're just hanging there.. Instructions don't say.

Snapping off the blue trim is the scary part.. still trying to figure that out haha

@Integra23 How did you remove the base to swap? I can't seem to remove the base's trim.. Did you have to take apart the whole mirror?

I'm not exactly sure where the tab/lock is. I ordered some depinning tools but we'll see if I can even do it lol

Got a picture of this by chance?