Sponsored


Dyno Numbers for TSP catted downpipe and PRL frontpipe.

OP
OP
koatic

koatic

Senior Member
First Name
Bryan
Joined
Jul 29, 2023
Threads
48
Messages
380
Reaction score
381
Location
SouthEast
Car(s)
93 EH with 97 JDM ITR swap, 2024 ABP/ orchid ITS
I can confirm with hondata logs that with stock tune these bolts-on are NOT leaning out to unsafe levels.
however now I am running the TSP stage 1 tune.
Sponsored

 

wetwheels

Member
First Name
Flip
Joined
Aug 12, 2023
Threads
2
Messages
12
Reaction score
2
Location
NY
Car(s)
Honda CRV
There are a few following the build on my ITS so I wanted to add it here.
I guess I also need to add in here that I am still on lock ECU with stock tune.
I have installed the (cerakoted) TSP catted downpipe, PRL frontpipe, PRL rear motor mount, PTP turbo blanket and PTP lava blanket for the downpipe.
New delta from previous dyno I did with PRL Intercooler, PRL titanium inlet and the HPS charge pipes was a net gain of 39hp and 44ft lbs torque.
Thats up 58hp and 58ft lbs torque from the stock dyno I did, and I am now netting 333hp at the wheel which after drivetrain loss conversion of about 10% is roughly 370HP at the crank! Travis was having some issues pulling up the previous dyno runs for the overlay so just got this printout instead.
Keep in mind that if I added the downpipe and frontpipe without already having done intake side parts I dont think the gains would be as strong by themselves. but that is just my opinion.

I would have to say to power increase it ridiculously noticeable and now so is the torque steer with a whopping 365ft lbs. :fear:
I also have to say between the turbo blanket and the downpipe the turbo lag has been considerably reduced which was a HUGE issue I had with the car previously. I like the almost instant response.
I can also say (my reaction is in the video) that I noticed immediately how much I could feel the engine with the PRL rear motor installed when I cranked the car.
I have since driven about 150 miles and it seems the bushing are broken in a little bit and it does not feel so raw cranking the engine now but the annoying buzzing sound from passenger side is definitely louder with increased vibration.

I did make some mistakes on the install because last I checked I am still human.
However, below is the full install, dyno and recap with a few easter egg pulls hidden in the vid. :lol:
I also wanted to show people all these mods can be done by yourself without a shop or a lift.
AHC videos make this stuff look real easy and it is 100% doable by the weekend mechanic like myself.


1712536076583-17.png
I wonder how much WHP or HP with TSP Tune, LMK
 
 



Top