Search results

If you feel uncomfortable working on your vehicle , then yes pay someone that knows what they are doing. I didn’t do it multiple times, I drained 4 quarts and added 4 quarts- let the car idle then moved the auto shifter throw out all the gears (P-R-D) ect then I was done. Im

If you go to Honda parts, they will give you 4 quarts of CVT fluid and a drain and fill plug gaskets . That’s all you need and it can be done at home in under 1 hour including time to jack up the car then bring it down. Very simple to do. I did mine at 15k miles but Honda service told me to do...

I have EOS on my corvette (side skirts and front lip) I am very happy with fitment but they are so delicate. They have a few chips and chunks missing with every speed bump. So I’m constantly pulling out the plastic welder and filling in the cracks or missing parts lol. But they are cheap in price.

I deleted my resonator and added a down pipe (Cvt here) the vehicle burples a lot more during de-acceleration and at idle a bit louder (when I use the cold start feature) in the morning, I can actually hear my car turn on. Removing resonator does not void warranty , just keep the part put away ...

Looks like a good quality … who makes the steering wheel, I’m curious if they have other vehicle options

My girl’s favorite lights on my Integra , these same bulbs we used on our 2016 Honda civic and 2024 Honda Pilot … a must for every Honda

This wine just started to be noticeable to me , I have a Cvt with a down pipe/Front pipe, intake and tune and just hit 15000 miles… I’ll change the fluid again and see if the noise goes away or not, not sure if I should be worried for this noise.

I didn’t have this issue, nor did I swap out lug nuts besides added the oem wheel locks… I doubt anything on the studs or lugnut changes from 2023 to 2024 so not sure if it’s an error on garage line part or a different issue.

Yes I had to pay (at a discounted rate) to re -tune the vehicle due to the new modifications, they have an option for live data turning at a higher price point so they can inspect the vehicle but the car felt fine so I didn’t feel like I needed to go that route since the car itself still drove...

So dumb question, is there any way to put on the Ktuner tablet to display what Tune we are on?!? I decided to switch to map 3 today to have a little fun with someone at the light… but I didn’t know til I tried switching , my vehicle has been in map3 til god knows when. I don’t recall how long...

No issues whatsoever, glad I spent the money on the Ktuner , no exhaust needed because after you upgrade to a After market catted down pipe and intake, vehicle does get louder and has a slight burple during de-acceleration . The Cvt is still holding strong . I only drive on map 3 (21-23psi) when...

So far just a Prl intake, front pipe , FMiC and 27won down pipe … I am daily running about 17-18 psi and when I go to map 3 it takes me to 22-23. Going to leave it as is for now

Definitely a must , I’ve already had them revise my previous tune after adding a down pipe but their tunes really wakes up this car and it makes this car such a better daily

Yes it does, if you go through my account , and look at the previous threads I’ve made , I’ve posted photos of me installing it . Not sure how to link other thread

I recently changed the fluid at 15k miles , I used amsoil cvt syn fluid … no difference in feel whatsoever but I have Piece of mind knowing I’m using something good. My 2 Previous S2k have all had amsoil and even now my corvette is using amsoil, either I’m a fan boy or I’ve trusted it because...

I as well am not hitting the 25 psi that map 3 stage says I should be at when I’m at full throttle, I think I get to 22psi max…. Not sure what else is needed for me to hit the 25 psi, normally it wouldn’t be a big deal but I ran my coworker with an SI and a Phearable tune and he hit 25 psi and...

Yes you’ll need the spacers, I have 20mm spacers in the front, with out it the bbk will not clear.

Just an update , I am running the 27won BBK with 20Mm spacers and everything fit perfect. I’m only posting this if future people that may want to rock a bbk with oem wheels.

Seems like a cool idea to put the usb C in the back , but like someone stated earlier. Usb c is not as firm as usbA and since I’m using the rear chargers for my kids to use when on their phones, I think I’ll leave em as is since it’s more sturdy….But I would really like for our apple car play to...

I was on the civicX forums and one of the vendors says that this is pushed back for another 6+ weeks til they are ready… they were taking pre orders but said it looks more like November.