Sponsored


Joined
Aug 27, 2024
Threads
2
Messages
8
Reaction score
19
Location
NC
Car(s)
'24 Acura Integra Type S, '08 Honda S2000, '01 Honda Prelude
Hey everyone! I usually document all my mods and stuff on my YouTube Channel but wanted to share in here for easy reference for folks who might be searching. This is just a comparison shot of how the car sits completely stock vs Eibach Pro-Kit Springs. As well as with SSR GTX01 wheels in gunmetal blue (sitting pretty flush with the +38 offset, and no spacers needed). The GTX01 wheels are 3.5lbs lighter than stock so a total of 14lbs unsprung weight savings. 19x9.5 +38 SSR wheels and used OEM tires.

As far as compared to stock, I can't give too much input since I didn't drive the car much before and just did a big move so no direct before/after driving. But as far as how it drives now, it feels great. And 14lbs unsprung weight savings is a huge benefit. I know a lot of folks don't take weight into consideration when buying wheels (when i was younger I was like this), but now I prioritize weight over looks and then find a wheel I like. Wheels ain't cheap, so why not also get some weight savings out of them! (also have a video below the photos for anyone who wants to see more angles of stock vs Eibach as well as OEM exhaust vs MBRP exhaust sounds)

Acura Integra Eibach Springs and SSR GTX01 Wheels vs Stock (14lbs Weight Savings) on 2024 Integra Type S stock-vs-modified-integra-typep-s_2_2


Acura Integra Eibach Springs and SSR GTX01 Wheels vs Stock (14lbs Weight Savings) on 2024 Integra Type S stock-vs-modified-integra-typep-s_1_1


VIDEO HERE FOR ANYONE WHO WANTS TO SEE MORE ANGLES COMPARING BEFORE AND AFTER OF THE EIBACH SPRINGS, AND SOME SOUND COMPARISONS OF STOCK EXHAUST VS MBRP EXHAUST. (STOCK WHEELS IN THIS COMPARISON VIDEO)

Sponsored

 

koatic

Senior Member
First Name
Bryan
Joined
Jul 29, 2023
Threads
48
Messages
379
Reaction score
376
Location
SouthEast
Car(s)
93 EH with 97 JDM ITR swap, 2024 ABP/ orchid ITS
i wanted something cheap for track and found these F5’s which only weigh 21lbs in size 19 with +45 offset which is almost flush. I have kept them on as they have grown on me. Wasn’t going to lower it though cause of problems with all my previous lowered cars but I started to notice the gap more and more so will probably break down and put springs on and yeah eibach pro kit (same I have on my civic) is what I am leaning to.
BTW appreciate your vids. Watch your channel.
Acura Integra Eibach Springs and SSR GTX01 Wheels vs Stock (14lbs Weight Savings) on 2024 Integra Type S IMG_3405
 
OP
OP
Driven District
Joined
Aug 27, 2024
Threads
2
Messages
8
Reaction score
19
Location
NC
Car(s)
'24 Acura Integra Type S, '08 Honda S2000, '01 Honda Prelude
i wanted something cheap for track and found these F5’s which only weigh 21lbs in size 19 with +45 offset which is almost flush. I have kept them on as they have grown on me. Wasn’t going to lower it though cause of problems with all my previous lowered cars but I started to notice the gap more and more so will probably break down and put springs on and yeah eibach pro kit (same I have on my civic) is what I am leaning to.
BTW appreciate your vids. Watch your channel.
IMG_3405.jpeg
Appreciate the support!

Wheels look sweet! They remind me of the Enkei Kojin which I had on my Evo X.
 

cchan383

New Member
Joined
May 15, 2023
Threads
0
Messages
4
Reaction score
3
Location
MA
Car(s)
Acura Integra
Hey everyone! I usually document all my mods and stuff on my YouTube Channel but wanted to share in here for easy reference for folks who might be searching. This is just a comparison shot of how the car sits completely stock vs Eibach Pro-Kit Springs. As well as with SSR GTX01 wheels in gunmetal blue (sitting pretty flush with the +38 offset, and no spacers needed). The GTX01 wheels are 3.5lbs lighter than stock so a total of 14lbs unsprung weight savings. 19x9.5 +38 SSR wheels and used OEM tires.

As far as compared to stock, I can't give too much input since I didn't drive the car much before and just did a big move so no direct before/after driving. But as far as how it drives now, it feels great. And 14lbs unsprung weight savings is a huge benefit. I know a lot of folks don't take weight into consideration when buying wheels (when i was younger I was like this), but now I prioritize weight over looks and then find a wheel I like. Wheels ain't cheap, so why not also get some weight savings out of them! (also have a video below the photos for anyone who wants to see more angles of stock vs Eibach as well as OEM exhaust vs MBRP exhaust sounds)

stock-vs-modified-integra-typep-s_2_2.jpg


stock-vs-modified-integra-typep-s_1_1.jpg


VIDEO HERE FOR ANYONE WHO WANTS TO SEE MORE ANGLES COMPARING BEFORE AND AFTER OF THE EIBACH SPRINGS, AND SOME SOUND COMPARISONS OF STOCK EXHAUST VS MBRP EXHAUST. (STOCK WHEELS IN THIS COMPARISON VIDEO)

SSR wheels look great! Do you have closer pictures to show the color of the wheels?
 
OP
OP
Driven District
Joined
Aug 27, 2024
Threads
2
Messages
8
Reaction score
19
Location
NC
Car(s)
'24 Acura Integra Type S, '08 Honda S2000, '01 Honda Prelude
SSR wheels look great! Do you have closer pictures to show the color of the wheels?
Thanks! I have a few videos which will probably show the color better than photos (since I do edit photos at times which can slightly alter the color). I'll drop them below. First was an unboxing (so off the car). Second is just a walk around on the car. Hope they help!





 

J0bando

New Member
First Name
Matt
Joined
Nov 1, 2024
Threads
0
Messages
1
Reaction score
0
Location
Memphis, Tn
Car(s)
2003 Honda S2000
I'm looking to get an A SPEC w/ Tech. How do these eibach spring affect the ride? Still smooth?
Sponsored

 
 



Top