debianx
Member
- First Name
- Carlos
- Joined
- Aug 2, 2024
- Threads
- 2
- Messages
- 13
- Reaction score
- 17
- Location
- Charlotte, NC
- Car(s)
- 2024 ABP ITS, 2006 Toyota 4Runner
- Thread starter
- #1
So I'll be installing a 2ch VIOFO A229 plus dashcam and Powercell Dash Cam Battery Pack into my ITS soon, still need to gather some parts. Blackboxmycar.com recently did an install into a 24 ITS and in their video they recommended to use either a 20 or 30 amp fuse with an add-a-fuse adapter. Here's a link to their YouTube video:
Looking at the fuse diagram in the car and at fuses themselves, I noticed that I have a 20 amp fuse installed in slot 16 which for a sunroof that our cars don't have. I know if we had a sunroof, it would only work while the car is turned on, so in essence I should be able to use this fuse for hardwiring the battery pack. Anyone see any reason why this would not be case?
Looking at the fuse diagram in the car and at fuses themselves, I noticed that I have a 20 amp fuse installed in slot 16 which for a sunroof that our cars don't have. I know if we had a sunroof, it would only work while the car is turned on, so in essence I should be able to use this fuse for hardwiring the battery pack. Anyone see any reason why this would not be case?
Sponsored
