Sponsored


Not so smooth shifting feeling

edido

Senior Member
Joined
May 2, 2023
Threads
27
Messages
171
Reaction score
65
Location
California
Car(s)
ITS (TEP)
Hi,

I now have about 850 miles on my ITS.
- I recently noticed that when I change gears, 1-->2 or 2-->3 or 4-->5, I feel sometime "bumps" . Like movement to get into the 2nd gear (or other) is not smooth and I can feel some bumpy resistance. It feels like the gear box a bit "lose" and if I don't perfectly align the movement of the stick I feel "bumps". Other times the feeling is smooth. When I just got the car, the shifts were super smooth.
- I didn't drive manual for last 15 years, and don't have much experience with "new" gears.

I can take the car to my dealer. I wanted to ask here if anyone experiences similar? Or, maybe can explain if it's a potential issue?
Sponsored

 

Azkyrie6

Senior Member
First Name
Henry
Joined
Jun 3, 2023
Threads
7
Messages
516
Reaction score
504
Location
Colorado
Car(s)
Acura TL, Acura MDX
Hi,

I now have about 850 miles on my ITS.
- I recently noticed that when I change gears, 1-->2 or 2-->3 or 4-->5, I feel sometime "bumps" . Like movement to get into the 2nd gear (or other) is not smooth and I can feel some bumpy resistance. It feels like the gear box a bit "lose" and if I don't perfectly align the movement of the stick I feel "bumps". Other times the feeling is smooth. When I just got the car, the shifts were super smooth.
- I didn't drive manual for last 15 years, and don't have much experience with "new" gears.

I can take the car to my dealer. I wanted to ask here if anyone experiences similar? Or, maybe can explain if it's a potential issue?
I think I can relate in a way. I felt that at times particularly 1->2 or downshifting to 2. Then I figured out that I was pulling the shift knob too hard to the left and it felt different. Iā€™ve since been easier with the motions. Direct motions up down left and right if you can and less diagonals.

passing the point of break in the shift does feel easier or it ā€œglidesā€. Little bit less crispy notch engagements.

lastly, be sure to fully press down on your clutch when shifting, maybe not to the floor everytime but you need a good feel for where the disengagement point is. Last thing you want to do is have gear selector rub on gear wheels.
If your shifts still feel crunchy could be the synchromesh bite. Youā€™ll have to develop a feel what RPMā€™s your transmission shifts most smoothly. A little synchro bite is okay. Just continue learning the car and pay attention to your technique
 

heatrate

New Member
First Name
PH
Joined
Nov 9, 2022
Threads
0
Messages
3
Reaction score
2
Location
Wisconsin
Car(s)
2023 6 speed manual 2014 MDX
I had a problem when shifting to the lower gears in the shift pattern -2, 4 and 6 especially to 2nd gear. The shifter made a different sound somewhat like a loose rattle sound. Shifting to 1, 3 and 5 didn't do this. I took it to the dealer and the technician confirmed something wasn't right and identified the problem was the shifter cable between the shifter and the transmission. The cable was replaced and the shifter now feels great and doesn't make the noise.
 

Azkyrie6

Senior Member
First Name
Henry
Joined
Jun 3, 2023
Threads
7
Messages
516
Reaction score
504
Location
Colorado
Car(s)
Acura TL, Acura MDX
I had a problem when shifting to the lower gears in the shift pattern -2, 4 and 6 especially to 2nd gear. The shifter made a different sound somewhat like a loose rattle sound. Shifting to 1, 3 and 5 didn't do this. I took it to the dealer and the technician confirmed something wasn't right and identified the problem was the shifter cable between the shifter and the transmission. The cable was replaced and the shifter now feels great and doesn't make the noise.
Damaged steel shifter cable? I wonder if they know the default setting the cable needs to be at. Either way glad you got it fixed. That cable coming loose while driving wouldnā€™t sound like a good time
 

optronix

Senior Member
Joined
Apr 15, 2023
Threads
23
Messages
1,337
Reaction score
1,978
Location
MD
Car(s)
2024 Integra Type S, 2023 Macan GTS
Damaged steel shifter cable? I wonder if they know the default setting the cable needs to be at. Either way glad you got it fixed. That cable coming loose while driving wouldnā€™t sound like a good time
This happened to at least a couple people with brand new Porsche 718s. Not sure it was damage, just misaligned from the factory. One pic had a brand new car with 1200 miles on a flatbed. Could not have been a fun experience.

My experience with this shifter has been nothing short of fantastic. It is still a bit harder to get into 6th than other gears, but I feel like that will improve over time as I get more highway driving in.
 

Sponsored

OP
OP

edido

Senior Member
Joined
May 2, 2023
Threads
27
Messages
171
Reaction score
65
Location
California
Car(s)
ITS (TEP)
Thanks for all responses here. I am taking the car to the dealership this week. Will keep you posted what they find. I am not taking it back until it's fixed for sure. It just getting worse every day.
 

RamVA

Senior Member
Joined
Jul 9, 2023
Threads
1
Messages
105
Reaction score
83
Location
McLean, VA
Car(s)
Beat, Acty, Integra Type-S, Motocompacto
Thanks for all responses here. I am taking the car to the dealership this week. Will keep you posted what they find. I am not taking it back until it's fixed for sure. It just getting worse every day.
If it's getting worse every day then there's a decent chance it's a hydraulic issue - the master cylinder, the slave cylinder, or the line may be leaking. Make sure they check that.
 

RCX

Senior Member
First Name
Andy
Joined
Sep 3, 2017
Threads
10
Messages
137
Reaction score
75
Location
Montreal
Car(s)
2017 FK8 -> 2023 GR Corolla -> 2024 Integra Type S
Watching.

My experience with <400kms, shifting is perfect. Will change transmission fluid to Amsoil with 1st oil change.
 

nawfoo

Senior Member
First Name
Kay
Joined
Jan 21, 2023
Threads
1
Messages
212
Reaction score
119
Location
South West
Car(s)
Integra
I like to briefly pop it into N before shifting instead of jamming it directly into gear. It resets the synchros and it feels smoother. I also don't fist the shift knob like Vin Diesel and just lightly ease it into gear.
 

Azkyrie6

Senior Member
First Name
Henry
Joined
Jun 3, 2023
Threads
7
Messages
516
Reaction score
504
Location
Colorado
Car(s)
Acura TL, Acura MDX
Watching.

My experience with <400kms, shifting is perfect. Will change transmission fluid to Amsoil with 1st oil change.
theres a certain Amsoil that does not have API certification. Just keep note of that because Acura could look at the oil and fluids used if thereā€™s every a warranty issue
 

Sponsored

GTO

Senior Member
Joined
Jun 27, 2023
Threads
3
Messages
66
Reaction score
144
Location
NoVA
Car(s)
24 ITS, 17 BRZ
I like to briefly pop it into N before shifting instead of jamming it directly into gear. It resets the synchros and it feels smoother. I also don't fist the shift knob like Vin Diesel and just lightly ease it into gear.
Sorry, I just couldn't miss the opportunity to use thisšŸ˜

Acura Integra Not so smooth shifting feeling IMG_8601
 
OP
OP

edido

Senior Member
Joined
May 2, 2023
Threads
27
Messages
171
Reaction score
65
Location
California
Car(s)
ITS (TEP)
An update:
- The dealership checked the transmission and they said it's "normal" (they also checked for any leaks). They said that when the car was brand new it was more stiffer and hence I didn't feel any "bump/resistance" when shifting 1-->2 or 3-->4 or 5-->6. They had two technicians drove the car.
- I still don't fully trust them and would like to ask for help here.

Looking for someone from the Bay Area (CA) who has ITS or FL5 and some technical knowledge / experience with transmissions. I would like to meet and have you drive the car with me. This will help me to either live with it and get better at shifting, or go back to the dealer. Please DM me if you can help.
 

Krazydan19

Senior Member
Joined
Jun 29, 2023
Threads
3
Messages
354
Reaction score
287
Location
Austin, tx
Car(s)
Model x, model 3, Rdx, triumph, ITS
Iā€™ve got 340 ish miles and in my experience with this car itā€™s not a ā€œslam gears carā€ When I was a young kid I used to no lift shift my EM1 Si and it loved it Slamming all those gears. I donā€™t feel that in this transmission, not a bad thing just likes you to just guide the shifter to the next gear rather than force it. My 2 to 3rd Shift is just a palm push, 3rd to 4th 3 finger pull, never try to put much pressure in the shifter rather let it run its path itā€™s designed to go on Thatā€™s atleast how mines been.
I donā€™t know if this is any help, just make sure clutch is full engaging and giving the car itā€™s needed revs.

You said 15 years ? What kinda car was it ?
 
OP
OP

edido

Senior Member
Joined
May 2, 2023
Threads
27
Messages
171
Reaction score
65
Location
California
Car(s)
ITS (TEP)
Iā€™ve got 340 ish miles and in my experience with this car itā€™s not a ā€œslam gears carā€ When I was a young kid I used to no lift shift my EM1 Si and it loved it Slamming all those gears. I donā€™t feel that in this transmission, not a bad thing just likes you to just guide the shifter to the next gear rather than force it. My 2 to 3rd Shift is just a palm push, 3rd to 4th 3 finger pull, never try to put much pressure in the shifter rather let it run its path itā€™s designed to go on Thatā€™s atleast how mines been.
I donā€™t know if this is any help, just make sure clutch is full engaging and giving the car itā€™s needed revs.

You said 15 years ? What kinda car was it ?
Thanks!

2-->3 is the smoothest shift and I also use palm push. 1-->2 and 3-->4 is where I need to work harder. I am trying not to apply much pressure, but I wish it was smoother. If it is how the transmission was designed, I will learn to live with it. I just want to make sure my car has no real problem.

Clutch is so light, and I find it's easy to fully engage it. As for revs, I am shifting in the 3500 range.

I had Golf GTI.
 

Krazydan19

Senior Member
Joined
Jun 29, 2023
Threads
3
Messages
354
Reaction score
287
Location
Austin, tx
Car(s)
Model x, model 3, Rdx, triumph, ITS
Thanks!

2-->3 is the smoothest shift and I also use palm push. 1-->2 and 3-->4 is where I need to work harder. I am trying not to apply much pressure, but I wish it was smoother. If it is how the transmission was designed, I will learn to live with it. I just want to make sure my car has no real problem.

Clutch is so light, and I find it's easy to fully engage it. As for revs, I am shifting in the 3500 range.

I had Golf GTI.
3500! 5k - redline is what Honda like to be wound up. VW ā€œGerman carsā€ much different gear box. From my experience.
Sponsored

 
 



Top