Anyone with aftermarket rims on type s?

[Nivek2slick]

So I haven't seen anyone except one type s on IG that has after market wheels . Anyone have pics /set up ? When my tires go bald is when I'm going to buy new rims . I want to fill the wide body and thinking 19.5 with .5 drop so it can be barely on top and a concave style or similar to our factory wheel I seen these and have good history with stance as they are light weight wheels thoughts ? I also seen these on IG . My car is LSM for reference

Sponsored

 

[dmd2005]

I’ve run a few different setups on my car sharing some wheels I have from my FK8.
Here are some pics of 18x9.5 et+45 Mugen MF10’s and 18x10 +40 CE28 CR2 Black Editions. I like the CE28’s much better with deeper lip. I’ll need to swap over to my wet weather/winter setup of 57DR Gramlights next week with Michelin Cross Climate 2’s. Temps are getting low over night and not a good idea to be running Bridgestone Potenza Sports I’m currently on.

If you like the stock look of the DE5 wheels or Y spoke wheels, look into the NSX or Titan 7’s. They will be forged and lighter than the Stance rims but will cost more.

 

[Nivek2slick]

I'll look into those wheels tyWhich do you like better the 9.5 or 10 ? Which has a nicer flush with the fenders ? And nice setup up btw

 

[Nivek2slick]

I just checked the Titan 7 ngl they fire these are in the middle of what I posted and would look good ...keep em coming though guys the more options and pics the better

 

[garyna]

https://www.integraforums.com/forum...ent-wheels-tires-suspension.51144/post-835699

 

[Nivek2slick]

Wait stock wheel are 9.5 ? I thought there 9s

 

[NecroFIesh]

OEM stock wheel sizing 2023 - 2024 Integra

Base models - 17x7 ET45

A-Spec models - 18x8 ET50

Type-S models - 19x9.5 ET60

-G

 

[Nivek2slick]

OEM stock wheel sizing 2023 - 2024 Integra

Base models - 17x7

A-Spec models - 18x8

Type-S models - 19x9.5

-G

Well then I gotta go 19x10 for the flush look lol thanks

 

[dmd2005]

Well then I gotta go 19x10 for the flush look lol thanks

Depends on the offset to get to flush. My 18x10 et+40 have a bit of poke and is pretty aggressive, but I’m running 265 width tires so it is slightly stretched. If I went with 275 or 285 it would definitely poke out further without negative camber adjustments.

18x9.5 et+45 is flush and +38 slightly pokes past fenders.

I’ve posted a link to System Motorsports blog on FL5 fitment before and rule of thumb applies to the DE5 as well.

https://www.systemmotorsports.blog/...ent-thread-system-motorsports-updated-8312022

 

[Nivek2slick]

Depends on the offset to get to flush. My 18x10 et+40 have a bit of poke and is pretty aggressive, but I’m running 265 width tires so it is slightly stretched. If I went with 275 or 285 it would definitely poke out further without negative camber adjustments.

18x9.5 et+45 is flush and +38 slightly pokes past fenders.

I’ve posted a link to System Motorsports blog on FL5 fitment before and rule of thumb applies to the DE5 as well.

https://www.systemmotorsports.blog/...ent-thread-system-motorsports-updated-8312022

I appreciate this. .yeah slight poke is ok I wanna be able to look from the back and see juuuuust smitch. Just like in your pics

 

[dmd2005]

I’ll take some pics after work tonight to show how the 18x10 et+40 looks like from the front/back.

 

[Midnight_VTEC]

Anybody running Spoon SW388 or good with photo shop? Would like to see those on a Platinum White ITS.

 

[b0nb0n]

Anybody running Spoon SW388 or good with photo shop? Would like to see those on a Platinum White ITS.

They released 19in Regamasters recently if you don't want to downsize

 

[Westhaver]

SW388's are apparently coming in 19" x 9.5 +45 soon.

 

[ender_ong]

SW388's are apparently coming in 19" x 9.5 +45 soon.

Looks like already out in Japan, possibly

Sponsored