submitaweasel
Senior Member
- Thread starter
- #1
Out of curiosity, I plugged in an OBDII reader I had to see what boost pressure the engine made after reading from other users, it was lower than the advertised maximum.
The reader reads the MAP sensor value. I saw a maximum of 7psi at partial throttle and 5psi at WOT in 2nd and 3rd gear in both "normal" and "sport." I verified the map value with the reader as the absolute value (uncorrected) never went past 20PSI at WOT.
I contacted the reader manufacturer (never had an issue in the past; had a mini Cooper s that ran 17psi that read correct on the same device verified by a mechanical gauge) and they stated it is simply reading the map signal.
Am I missing something? Or has my new integra had a boost leak since purchase that my butt dyno somehow missed?
The reader reads the MAP sensor value. I saw a maximum of 7psi at partial throttle and 5psi at WOT in 2nd and 3rd gear in both "normal" and "sport." I verified the map value with the reader as the absolute value (uncorrected) never went past 20PSI at WOT.
I contacted the reader manufacturer (never had an issue in the past; had a mini Cooper s that ran 17psi that read correct on the same device verified by a mechanical gauge) and they stated it is simply reading the map signal.
Am I missing something? Or has my new integra had a boost leak since purchase that my butt dyno somehow missed?
Sponsored