Tiger Eyer Pearl Track Build

[gold_membr]

Hey All,
Decided to start posting in the forums to document my build. If the car looks familiar this is the ITS APR has been using to develop the current kit you've seen circulating around. My goal with the type S is to build a do it all car with my own flare of style. My background comes from Motorsports mainly IMSA as a Car Chief and Race Technician, I also work with Counterspace Garage in developing products that are track focused such as This APR kit. Follow along and i hope you guys enjoy the build !

Socials: IG gold_membr

Parts List
Apr Aero Kit
( GT-250 wing)
TWS Forged RS317
CSG Spec CPB/CP Brake pads
GiroDisc 2pc Rotors
Swift lowering springs
Tomei Dual Exit Ti Exhaust
Zestek Wheel system

Sponsored

 

[CatBus]

Are the wheels 18x or 19x?

 

[Doskiller]

I could never get an answer from anyone about the Zestek system fitting the DE5. Did you just use the Type R model and it worked? Thanks in advance for answering my question ......... Kev ;-)

 

[gold_membr]

Are the wheels 18x or 19x?

18x9.5

 

[gold_membr]

I could never get an answer from anyone about the Zestek system fitting the DE5. Did you just use the Type R model and it worked? Thanks in advance for answering my question ......... Kev ;-)

Yes the FL5 system is compatible

 

[StingertimeNC]

Looks pretty tight!

 

[Victorofhavoc]

Any plans for a proper splitter and cage?

 

[MERAKIAUTOWORKS]

Nice! Hope to see you in the streets of Anaheim..

-Josh

 

[gold_membr]

Any plans for a proper splitter and cage?

Eventually adding a splitter to the air damn as the car progresses currently want to maximize the street plus setup I have now . As for a cage time will tell I wanted to keep the car as street friendly as possible. Don’t intend on competing in SCCA or doing a crazy unlimited build so a cage is in limbo on my choice on the matter

 

[StingertimeNC]

Any idea what kind of downforce numbers, and at what speeds, the wing is good for?

 

[Victorofhavoc]

Any idea what kind of downforce numbers, and at what speeds, the wing is good for?

It's a small but efficient wing. It generates enough to shift the balance of the car without front-end aero. It becomes very effective with a gurney and it's small size makes for good drag numbers as well.

Someone on bimmerpost did the hard work of documenting for us

https://www.m3post.com/forums/showthread.php?t=1586800

 

[1tointegra]

The Best TEP build

Love the whole build obviously Go get your APR Aero ppl !

What an inspiration

 

[gold_membr]

It's a small but efficient wing. It generates enough to shift the balance of the car without front-end aero. It becomes very effective with a gurney and it's small size makes for good drag numbers as well.

Someone on bimmerpost did the hard work of documenting for us

https://www.m3post.com/forums/showthread.php?t=1586800

Was about to link the same thread haha . Also for further note the GT 250 is the same blade used in the Honda / Acura TCX / TCR cars

Sponsored