What did you do to your Teggy today? 👨🏻‍🔧🧰🚿🛠

[Integra23]

Forgive the sweat spots . Hot as hell here

Sponsored

 

[RRP RSX-S]

I got a rock chip dead center of the windshield. Safelite said it’s not deep enough to repair and shouldn’t “grow legs”. But it’s ugly as hell and why I can have nice things.

I’d replace the entire piece if I wasn’t terrified about the recalibration of the cameras etc.

 

[Integra23]

I got a rock chip dead center of the windshield. Safelite said it’s not deep enough to repair and shouldn’t “grow legs”. But it’s ugly as hell and why I can have nice things.

I’d replace the entire piece if I wasn’t terrified about the recalibration of the cameras etc.

I think this windshield is a rock magnet. At least 4 or 5 rocks have hit mine leaving small craters.

 

[RB2490]

Bored today and decided to 3d print an intake inlet tube. This is just a prototype to check for fitment.

 

[Linas19]

Bored today and decided to 3d print an intake inlet tube. This is just a prototype to check for fitment.

Since TPU is 3D printable, wonder if it can be used to print an actual intake inlet TPU.

 

[RB2490]

Since TPU is 3D printable, wonder if it can be used to print an actual intake inlet TPU.

Not sure what material I'm going to use yet. Maybe PC. I have a high temp extruder so I can use most materials if I want. Wish I would have gotten a bigger 3d printer though

 

[Alex K]

Notice they now have a part number for the spare tire kit.. 06421-3S5-A10
PRL has it available
https://prlmotorsports.com/products/genuine-acura-2023-integra-spare-tire-kit

Possibly a dumb question. I don't see a spare for the 18 inch A-Spec rims available, although I want to have one in the trunk. Will the currently available spare tire 125/80R17 work for the 235/40R18 (just to get the car to a nearby tire shop)? Never had to buy a spare tire in the cars I own/ed.

 

[BKK Jack]

If my understanding and math are correct. The overall diameter of the spare is 24.87" and the stock wheel tire combo is 25.40", so that's just over 1/2" difference (0.53") between the two. That really shouldn't be a problem for a short distance, but it might be less sketchy if you only put it on the rear.

 

[Integra23]

Possibly a dumb question. I don't see a spare for the 18 inch A-Spec rims available, although I want to have one in the trunk. Will the currently available spare tire 125/80R17 work for the 235/40R18 (just to get the car to a nearby tire shop)? Never had to buy a spare tire in the cars I own/ed.

 

[lauren01]

Just to confirm, here is the compact spare tire from the Owner’s Manual.

 

[ghostkp]

Tuxmat installed.. they look fantastic. Not really a rubber more like a high grade vinyl. You can tuck almost everything under existing interior trim

How do they feel?

 

[Integra23]

How do they feel?

They fit great and look premium. A little noise when depressing clutch pedal so I might add a clip or two. But I tucked all mats into the trim so its mostly seamless looking.

 

[RUNN1N]

They fit great and look premium. A little noise when depressing clutch pedal so I might add a clip or two. But I tucked all mats into the trim so its mostly seamless looking.

I actually like these quite a bit more than the OEM all-season mats, I'm wondering how they'll hold up to real-world use given the material.

If you don't mind, can you drop a Sonic ice cream cone in the dead center of one of them, then see how it cleans up tomorrow after it's sat outside in the sun? That should do it. I'll Venmo you for the cone.

 

[NeoDiNardo]

Someone on Facebook had custom carbon fiber overlays made. Pure sex. Full carbon fiber pieces of each of these should be made for the Integra Type-S when it comes out.

 

[SuperCyan]

I'd only want it for the center area around the shifter, I'm fine with everything else as is. Just that gloss black gets dirty and scratched up so quickly

Sponsored