Sponsored


Wunderladen Catch Can For A-Spec?

ASPEC

Member
Joined
Mar 3, 2025
Threads
5
Messages
43
Reaction score
15
Location
New Jersey, USA
Car(s)
2025 Acura Integra A-Spec
Has anyone purchased and installed one of these? If so, what are your impressions? I've been researching and this is what I continuously come up with as far as direct fitment options go.

Thanks in advance, as always!
Sponsored

 

PrecordFK7

Member
First Name
Thom
Joined
Jun 21, 2021
Threads
1
Messages
37
Reaction score
95
Location
California
Car(s)
2024 Integra Type S
I had one on my 10th gen Civic 1.5t hatch and I have one now on my Integra. Bought one for each of my cars if that says anything. Wunderladen only puts out great products in my opinion.
 
OP
OP
ASPEC

ASPEC

Member
Joined
Mar 3, 2025
Threads
5
Messages
43
Reaction score
15
Location
New Jersey, USA
Car(s)
2025 Acura Integra A-Spec
I had one on my 10th gen Civic 1.5t hatch and I have one now on my Integra. Bought one for each of my cars if that says anything. Wunderladen only puts out great products in my opinion.
Good to know. I've run them on previous platforms and always felt it important to have. Glad it sounds like fit and finish are good. I'll most likely be pulling the trigger in the upcoming days.

Thanks!
 

Savannah@TSP

Elite Sponsor
Joined
Apr 1, 2025
Threads
1
Messages
4
Reaction score
3
Location
USA
Website
www.twostepperformance.com
Car(s)
'23 Civic Si, '98 EJ6, '20 FC4 (Sold)
Build Thread
Link
Wunderladen makes quality stuff. I have several parts from their brand installed on my Si.
The 11th gen 1.5T catch can will fit your A-Spec.
 
OP
OP
ASPEC

ASPEC

Member
Joined
Mar 3, 2025
Threads
5
Messages
43
Reaction score
15
Location
New Jersey, USA
Car(s)
2025 Acura Integra A-Spec
Wunderladen makes quality stuff. I have several parts from their brand installed on my Si.
The 11th gen 1.5T catch can will fit your A-Spec.
Thank you very much, Savannah. Much-appreciated! This will be my next install then.

Appreciate the input, everyone. Thanks again.
 

Sponsored

creaturemachine

Senior Member
First Name
Brad
Joined
Mar 20, 2023
Threads
1
Messages
332
Reaction score
294
Location
Canada
Car(s)
2023 Integra 6MT
Do you get much out of the thing? How often do you need to service it?
 
OP
OP
ASPEC

ASPEC

Member
Joined
Mar 3, 2025
Threads
5
Messages
43
Reaction score
15
Location
New Jersey, USA
Car(s)
2025 Acura Integra A-Spec
Do you get much out of the thing? How often do you need to service it?
I can't speak to the Integra as of yet, but I'm sure others can. However, most recently, I ran a catch can on a 5.0 Mustang Coyote motor and emptied it out with each oil change. It definitely caught blow-by. Same with other platforms I have used them on.
 

Savannah@TSP

Elite Sponsor
Joined
Apr 1, 2025
Threads
1
Messages
4
Reaction score
3
Location
USA
Website
www.twostepperformance.com
Car(s)
'23 Civic Si, '98 EJ6, '20 FC4 (Sold)
Build Thread
Link
Mine isn't picking up much - but it is picking up.
I think most benefit will be seen on the CCV side, which Wunderladen is working on.
There was a fitment concern with the inlet pipe to feed hoses through, but I think it will be alright as there is more room with the 11th/5th gens than the 10th gens.

I'd rather have it there and catch little than not be there to catch at all. :p
Sponsored

 
 





Top