What did you do to your Integra Type S today? 🙋🏻‍♂️

[optronix]

Splash guards came with my car as part of 'protection package'.

Love the splash guards.

OEM all weather mats and trunk liner not great in my opinion. Flimsy and poor fit. Get aftermarket instead.

The front OEM all weather mats I actually really like. They don't fit well in the back though... but I only use the back for my dog so it works.

I bought the splash guards with intent to install them myself but alas I am lazy. I have to get my car back in for the horn not working (thinking about it I should probably just check the fuse first...), but I was going to have them install the titanium shift knob (and possibly alcantara wheel...), may as well have them slap the splash guards on as well.

Sponsored

 

[vtecvlow]

Oem window deflectors came in today!! No need for before pictures right?

The last time I installed oem window deflectors was over a decade ago, took me an hour to install these.

Advice, peel off the tiny end tape first then work your way around. I peeled the tiny ones half way, then they just folded back over onto itself lol.

 

[optronix]

Posted in another thread but gratuitously posting here again for likes.

DIY coated with AMMO Reflex Pro (original formula). Really not much else. No excruciating extra prep like paint correction or even clay. Washed with a wax-stripping shampoo (Chemical Guys' Clean Slate), dried with a leaf blower and mf towel, and went after it with the Reflex. Whole process took about 2 hours and I really took my time. A full bottle of Reflex Pro (I get 2 full cars out of it and have a little to spare) goes for less than $200.

 

[Hakmamba]

Splash guards came with my car as part of 'protection package'.

Love the splash guards.

OEM all weather mats and trunk liner not great in my opinion. Flimsy and poor fit. Get aftermarket instead.

I agree with this as well, for those who don't have the factory all weather mats or trunk liner and considering getting them, they feel very flimsy, try other options like weathertech or tuxmats

 

[mopar_man]

That PRP is absolutely beautiful.

 

[Integra23]

Ordered the PRL Titanium intake from @axion_industries along with the RV6 RSB. Thanks Mike.

 

[FloArm]

Got tints. 20% all around, minus windshield

 

[ghostkp]

Broke my rearview dimming mirror and the one with homelink I bought trying to splice wires rather than buying a harness

 

[ghostkp]

Broke my rearview dimming mirror and the one with homelink I bought trying to splice wires rather than buying a harness

Well, the dimming feature still works, but the homelink doesn't. I don't know what to do to make it work. If I could get a wiring diagram for the 2023 Integra AND the homelink mirror wiring diagram I could potentially figure it out. Otherwise, I got the homie coming through with a soldering iron and solder so I can "properly" repair the original mirror, and I'll just stick with that and buy the one for the button blanks.

 

[ender_ong]

Was careless and SLAMMED (jk, gently opened) the door into the metal fender before going all the way up the uhaul vehicle transporter ramps, within the first hour of owning it. Less than a 1/2” chip but fuuuuuu I hate myself. Luckily my PPF shop (shoutout to Chris at Exclsv Motorsports) has a miracle worker paint guy, so looking forward to PPF install and no more chip

 

[bpebler]

Ok, so posting here as requested as well. I don't have really any quality pics yet since I haven't removed the tire lube & had to rush inside for a meeting, this will give you an idea of the wheel/tire fitment. I was surprised there wasn't more of a tire gap. Looking at it now, I don't think there's any reason to lower it via springs or Ohlins or whatever else - as far as looks go.

Apex Forged Sprint Line VS-5RS face profile 3 in Anthracite - 18x10.5" ET47.
Continental ExtremeContact DWS06+ in 275/35/18.

 

[NecroFIesh]

Looking gorgeous Bobby....wow.

-G

 

[FloArm]

Ok, so posting here as requested as well. I don't have really any quality pics yet since I haven't removed the tire lube & had to rush inside for a meeting, this will give you an idea of the wheel/tire fitment. I was surprised there wasn't more of a tire gap. Looking at it now, I don't think there's any reason to lower it via springs or Ohlins or whatever else - as far as looks go.

Apex Forged Sprint Line VS-5RS face profile 3 in Anthracite - 18x10.5" ET47.
Continental ExtremeContact DWS06+ in 275/35/18.

Any rubbing under load? Looks great!

 

[bpebler]

Any rubbing under load? Looks great!

Surprisingly no rubbing at all even under load with the oem wheels & tires in back or at full lock!

 

[Integra23]

Ok, so posting here as requested as well. I don't have really any quality pics yet since I haven't removed the tire lube & had to rush inside for a meeting, this will give you an idea of the wheel/tire fitment. I was surprised there wasn't more of a tire gap. Looking at it now, I don't think there's any reason to lower it via springs or Ohlins or whatever else - as far as looks go.

Apex Forged Sprint Line VS-5RS face profile 3 in Anthracite - 18x10.5" ET47.
Continental ExtremeContact DWS06+ in 275/35/18.

My favorite wheel style... Tempting.

Sponsored