Sponsored


Starting up hiccups, can take a few tries

porkster

Member
First Name
Jerry
Joined
Mar 4, 2024
Threads
2
Messages
26
Reaction score
32
Location
New York City
Car(s)
ITS - ABP
Had on several occasions, when attempting to start the car, the cranking is cut short and gotta try again, sometimes it takes 3 tries. Clutch in, brake pedal too, and push the button, hear the starter sound and then it cuts off abruptly. Same process, clutch in, brake, push button, and it may or may not fire up all the way. I am guessing the issue is a clutch sensor. Was going to let the wife try the car, then thought about her stalling in an intersection and having issues turning it back on.
Sponsored

 

Tw1stedlog1k

Senior Member
First Name
Ken
Joined
Apr 17, 2023
Threads
2
Messages
342
Reaction score
444
Location
Massachusetts
Car(s)
M2 Competition (R.I.P.), ABP ITS
I had this happen the first few starts also. Mine was a relatively simple fix. When starting up, I needed to hold the clutch in longer than I usually would on my other cars. I chalked it up to one of the quirks of the car.

I noticed it wants to finish up the whole startup sequence; gauge sweep, start, fire, etc before I can release the clutch.

Not sure if that's your specific issue but mine was fairly benign.
 

SilverRocket

Senior Member
Joined
Oct 23, 2023
Threads
7
Messages
304
Reaction score
403
Location
The Moon
Car(s)
'24 LSM ITS
I had this happen the first few starts also. Mine was a relatively simple fix. When starting up, I needed to hold the clutch in longer than I usually would on my other cars. I chalked it up to one of the quirks of the car.

I noticed it wants to finish up the whole startup sequence; gauge sweep, start, fire, etc before I can release the clutch.

Not sure if that's your specific issue but mine was fairly benign.
This!

If not, is there a potential that your battery is low, not drained completely but enough that it's not giving it the full juice needed?
 

egxflash

Senior Member
Joined
Feb 25, 2024
Threads
5
Messages
480
Reaction score
369
Location
CA
Car(s)
2024 Integra Type-S
I had this happen the first few starts also. Mine was a relatively simple fix. When starting up, I needed to hold the clutch in longer than I usually would on my other cars. I chalked it up to one of the quirks of the car.

I noticed it wants to finish up the whole startup sequence; gauge sweep, start, fire, etc before I can release the clutch.

Not sure if that's your specific issue but mine was fairly benign.
Something similar to this happened to me on Friday. I pressed the start button, engine turned over and then it died.

Took me by surprise. I didn't notice how quickly I took my foot off the clutch though so I'll keep this in mind.

For reference, I've got 500 miles on the ticker.
 

keAiko18

Member
First Name
Marcus
Joined
Feb 27, 2024
Threads
1
Messages
18
Reaction score
26
Location
HI
Car(s)
'24 ITS
I haven't needed to press on the brake pedal, only the clutch pedal needed.
But yes, if I start to release the clutch pedal too soon, even just the slightest, the car will cut out and stop the start engine sequence.

So yeah to the OP, assure clutch pedal stays down until car fires up. All G
 
Last edited:

Sponsored

egxflash

Senior Member
Joined
Feb 25, 2024
Threads
5
Messages
480
Reaction score
369
Location
CA
Car(s)
2024 Integra Type-S
I haven't needed to press on the brake pedal, only the clutch pedal needed.
But yes, if I started to release the clutch pedal too soon, even just the slightest, the car would cut and stop the start engine sequence.
I don't press the brake pedal either. The whole brake pedal thing is weird to me actually.

In other manual cars, I clutch in, turn the engine over, release the handbrake and go never ever having touched the brake pedal. So a lot of time, the car yells at me because I forget to press the brake pedal when I push the e-brake switch.
 

optronix

Senior Member
Joined
Apr 15, 2023
Threads
23
Messages
1,341
Reaction score
1,981
Location
MD
Car(s)
2024 Integra Type S, 2023 Macan GTS
Leave the clutch pedal depressed until the car fully starts, 99.9999% will permanently resolve this issue.

For that .0001%, get it to the dealer, it's under warranty.
 
OP
OP
porkster

porkster

Member
First Name
Jerry
Joined
Mar 4, 2024
Threads
2
Messages
26
Reaction score
32
Location
New York City
Car(s)
ITS - ABP
I'll keep it in mind and have the clutch depressed for a bit longer. Going to record vids of my starts in case that doesn't resolve it. The brake is a habit with this car because of the electronic e-brake that won't disengage until the brake pedal is hit.
 

SilverRocket

Senior Member
Joined
Oct 23, 2023
Threads
7
Messages
304
Reaction score
403
Location
The Moon
Car(s)
'24 LSM ITS
I'll keep it in mind and have the clutch depressed for a bit longer. Going to record vids of my starts in case that doesn't resolve it. The brake is a habit with this car because of the electronic e-brake that won't disengage until the brake pedal is hit.
I've started to just drive and use the auto disengage feature. Works well enough that I've stopped taking it off by depressing the button.
 

Sponsored

ChromaPop

Senior Member
First Name
Brian
Joined
May 11, 2023
Threads
16
Messages
201
Reaction score
168
Location
Franklin, TN
Car(s)
Hyundai Veloster N; VW GTI's, Mazdaspeed 3, Mini C
I had this happen the first few starts also. Mine was a relatively simple fix. When starting up, I needed to hold the clutch in longer than I usually would on my other cars. I chalked it up to one of the quirks of the car.

I noticed it wants to finish up the whole startup sequence; gauge sweep, start, fire, etc before I can release the clutch.

Not sure if that's your specific issue but mine was fairly benign.
Same here. I have had about 10 different manual transmission cars and this one definitely requires a clutch hold of about twice the amount of time as any other car I've owned or it will abruptly stall and stop.
 

koatic

Senior Member
First Name
Bryan
Joined
Jul 29, 2023
Threads
48
Messages
381
Reaction score
387
Location
SouthEast
Car(s)
93 EH with 97 JDM ITR swap, 2024 ABP/ orchid ITS
Agreed you need to hold the clutch longer until the engine is fully started..

ALSO, important note for those that do NOT put on their seatbelts before driving.
safety "feature" is the parking brake will NOT auto dis-engage when you let out the clutch in gear if the drivers seatbelt is not connected.. in this scenario it will also beep at you..
 

Braun

Member
Joined
Mar 27, 2024
Threads
1
Messages
17
Reaction score
4
Location
Anaheim, CA
Car(s)
2024 Apex Blue Pearl ITS
I had this happen for the first time the other day. I'm not certain, but I'm pretty sure I had immediately released the clutch after starting which I assumed was the cause of the engine not completing its startup. Now I hold the clutch in a little longer and haven't had it happen again.
Sponsored

 
 



Top