What spoilers are you guys getting, if any?

[TopazM3]

When you get it, before you pull any adhesive or tighten any bolts, just lay it on the hatch and spend some time moving it around as much as possible, See how it lays the best. The bolts will basically define where it's going to sit. if it won't lay flat and flush on it's own, just know that tightening the bolts will not change this. Also, something I didn't do was completely tighten it down before removing the top of the adhesive strips, This will definitely show you how it's going to sit.

Also, take your time removing the stock spoiler, so you can put it back on if you need to. There's just a bit of adhesive on the ends, other than that just the clips hold it on the trunk, and most of them should be reusable if you're careful.

Thanks for the good advice. I was planning to test fit without pulling the tapes. Good point about care for the OEM spoiler.

Sponsored

 

[Integra23]

Here the gap on mine

 

[StingertimeNC]

Did you put a bead of silicone in there?

That doesn't look as bad as mine. I don't think I will be caulking it.

 

[Integra23]

Did you put a bead of silicone in there?

That doesn't look as bad as mine. I don't think I will be caulking it.

Yeah I could see light coming through in various spots so put some black silicone down.
My mounting bolt locations didn't come with foam seals installed. They shipped them to me so now I have to decide if I want to rip it all apart again or not.

 

[StingertimeNC]

FYI, I heard back from Jeremie at Artwork again. He is committed to making things right. He's hoping to get an ITS back in his possession for some additional test fitting, and then make some modifications to his mold for better fitment. Stay tuned, this could take some time.

 

[Negitoro7]

Between the fitment issues of the Artwork spoilers, to the cost and drilling of the OEM carbon one, I think I’ll just stick with the subtle and classy OEM lip spoiler.

Taking delivery of the car tomorrow and have informed the dealer that I’ll decline the carbon spoiler that I was close to agreeing to.

 

[TopazM3]

FYI, I heard back from Jeremie at Artwork again. He is committed to making things right. He's hoping to get an ITS back in his possession for some additional test fitting, and then make some modifications to his mold for better fitment. Stay tuned, this could take some time.

Thanks for the info. I’m guessing that I won’t be getting my V2 anytime soon, even though I’ve paid for it. I’d rather have it right

 

[jaypinto]

Here’s a few photos of my artwork spoiler

 

[bpebler]

Thanks for the info. I’m guessing that I won’t be getting my V2 anytime soon, even though I’ve paid for it. I’d rather have it right

G4werkz CF has an oem CF spoiler that reuses just the lip spoiler's existing holes.

 

[Compromise]

Yeah I could see light coming through in various spots so put some black silicone down.
My mounting bolt locations didn't come with foam seals installed. They shipped them to me so now I have to decide if I want to rip it all apart again or not.

What silicone did you put?

 

[Integra23]

What silicone did you put?

Black rtv ffrom the auto parts store.

 

[TopazM3]

G4werkz CF has an oem CF spoiler that reuses just the lip spoiler's existing holes.

My plan is the larger V2 spoiler in body color.

 

[bpebler]

My plan is the larger V2 spoiler in body color.

I'd love to see that! Which color?

 

[bpebler]

@StingertimeNC - I finally took some better pics after adding some sealant. It looks like the bottom front of yours was more off on the mold or something than mine or @Integra23 . Jeremie still taking care of you?

 

[TopazM3]

I'd love to see that! Which color?

Liquid Carbon Metallic.

Sponsored