Just to clarify, when you say "door switch," are you referring to the window switch and mirror switch, plus an additional button for the folding mirrors? That's the setup I just installed, and I wanted to check if all the wiring is good by toggling that button to see if my single folding mirror operates. Does everything start working as soon as one side is installed, or do both sides need to be in place? Coming from a VW background, I was used to mostly coding without much wiring involved. Thanks for your help!
Yes, I meant the replacement mirror control on driver side and replacement window switch on passenger side. I installed all pieces and never tried a partial. Both components contain extra communication chipsets. I would install both sides and see if the folding mirror button functions
You can do partial testing. I did to make sure I did the wiring correct and making sure the mirrors are folding correctly before I go any further. You don't have to disassemble the stock one to test, just unplug the stock and plug in the folding one.
Is this the switch module from the the kit or the original with the car?I am still trying to track down the folding issue, and I've taken a look at the window switch to check for the folding chip. It does have a chip, but it looks a bit different from what I found online. Has anyone encountered something like this before? Thanks for your help!
The switch in the picture above is from the kit, and I just finished installing the passenger side. Everything is working great, so it looks like both sides need to be in for the mirrors to function. What a relief!
That's not true. Kit C includes the wire that connects both sides but is not needed with our cars. Kit F excludes this extra wire.Was just looking at Mikstore for the C/F kit and looks like they changed up their folding mirror kits to cheap kits without CAN integration and the window switch assembly panel. Wiring connects from driver side to passenger side now and they just provide the mirror switch with folding button
Oh well, if I was planning to do this should've bought the kit sooner.
You're correct, my dumbass was looking at the wrong product on their site.That's not true. Kit C includes the wire that connects both sides but is not needed with our cars. Kit F excludes this extra wire.
No rattle at all! In fact, the slight rattle I had in the passenger door before the installation has completely vanished.
to relearn the auto-up function on your Honda or Acura window switch, simply open the window completely, then press and hold the window switch in the "up" position for a few seconds after it closes all the way. This will help the system learn the right travel distance for the automatic feature to work smoothly
