Ktuner for 2023 Integra is live!

[RB2490]

Pull the trigger on Phearable @RB2490. It’s buttery smooth. Running map 2 is sweet.

Yea I've been contemplating it. I may pull the trigger on it

Sponsored

 

[Integra23]

Only thing we are missing is flat foot shifting..

 

[RB2490]

Only thing we are missing is flat foot shifting..

Having this would be awesome!

 

[RB2490]

So I'm now 18psi/21psi
throttle level 2 with reduced rev hang
Turbo responsiveness level 1
Early spool.
Car feels amazing and I'm finally hitting very close to boost targets with early spool.

 

[RB2490]

I'm going to be Installing a custom made intake( well sort of custom) just for sound. Maf will be nearly identical to stock and a 3d printed airbox cover(simple rectangle for now just for testing). What should I be looking out for in terms of parameters to insure its not screwing the car up. I know knock control, fuel trims, afr. Anything else in particular

 

[KTuner]

Fuel trims will tell you if the MAF housing is close to factory. If it's off you'll need to alter the MAF scale. Other parameters will vary depending by how far fueling is off in this case.

 

[RB2490]

Fuel trims will tell you if the MAF housing is close to factory. If it's off you'll need to alter the MAF scale. Other parameters will vary depending by how far fueling is off in this case.

Maf should be very close to stock so I'm hoping not much variation. Thanx for the info.

 

[RRP RSX-S]

Only thing we are missing is flat foot shifting..

I have flat foot shifting with my Phearable tune…… (CVT) lol

 

[RRP RSX-S]

@RB2490 since your set up is like mine, 1.2v with the tunerview app. How can I see the k.con values in the app. None of the screen layouts have it.

 

[KTuner]

Knock control is indeed an item you can choose within TunerView. If you're not familiar with the usage of the app see the tutorial videos in the online help.

 

[RB2490]

@RB2490 since your set up is like mine, 1.2v with the tunerview app. How can I see the k.con values in the app. None of the screen layouts have it.

So open ktuner and click layout you would like to use.

Then on one of the parameters click and hold the screen until you see this menu

Then where it says parameter hit the select option and then choose which parameter you would like to monitor

 

[RRP RSX-S]

Ok. I’ve done that but didn’t noticed the parameter at the top

 

[RB2490]

Does fuel quality affect fuel stft and ltft. And when I mean fuel quality I don't mean 91 vs 93 I mean gas station vs gas station. I'm only asking because during pulls using Valero 93 my k.control will go from .49 to .62 in one pull ND come back down after like 5 mins. LT fuel trims were -4. I switched to shell because it was like 60 cents cheaper and now my K.control doesn't move from .49 during 1 or two pulls and the LTFT went to 0. STFT now stays 0 during partial or WOT

 

[KTuner]

Different fuels contain different additives and even different levels of ethanol, so fuel trims may adjust based on those inclusions.

 

[RB2490]

Different fuels contain different additives and even different levels of ethanol, so fuel trims may adjust based on those inclusions.

Figured! I guess shell is my new gas station and it's cheaper because my numbers are way better now and knock Control never changed after pulls.

I've been stuck at -3 , -4 for the longest. Today after a decent drive I'm at 0, -1 and knock control stayed .49 after 2 pulls

Sponsored