Ktuner for 2023 Integra is live!

[Tux_Integra]

I've never seen a graph or chart on that actually response curve in a civic si or integra but after driving today in comfort I'd say comfort to normal is significant change and normal to sport is mild change

sorry I meant the option in the ktuner for level I II and III, not sure if you tried it.

Sponsored

 

[RB2490]

sorry I meant the option in the ktuner for level I II and III, not sure if you tried it.

I tried I and II so far. I like II with the rev hang option. Early boost is also a must. It feels night and day with that option enabled. The car is so much more responsive and you can really feel the turbo kick in when you want it to. Weather is much cooler and this car really moves now.

 

[RB2490]

It's been a while but here's a nice run for you guys.

 

[Tux_Integra]

It's been a while but here's a nice run for you guys.

what is your current Ktuner setup?

 

[RB2490]

what is your current Ktuner setup?

20PSI map/Early Spool/Throttle Level II w/ Rev hang reduced/ Turbo Responsiveness Level I/ VSA off.

 

[Integra23]

I am unable to switch maps at idle. If I hold the cancel button it reports 3k rpm even though it's on Map 1 on cold start. If I do the same procedure while driving it reports the correct Map 1 and lets me change it. Anyone else seeing this issue?

 

[KTuner]

If you're actually on the clutch that'll be for altering the 2-step RPM, otherwise it's the same procedure any time the engine is running and Cruise Main is off.

 

[KTuner]

I am unable to switch maps at idle. If I hold the cancel button it reports 3k rpm even though it's on Map 1 on cold start. If I do the same procedure while driving it reports the correct Map 1 and lets me change it. Anyone else seeing this issue?

If you're actually on the clutch that'll be for altering the 2-step RPM, otherwise it's the same procedure any time the engine is running and Cruise Main is off.

Was that the case here?

 

[Integra23]

Was that the case here?

Yep. Thanks!
I didn't realize it had 2 step enabled much less that you could alter it.
Anyone try the 2 step with factory exhaust and cats?risk of damage?

 

[KTuner]

A launch limiter (Low limiter when not moving) is always active and doesn't affect cats. If you're actually thinking about anti-lag that is a feature that does need to be enabled and can overheat cats.

 

[RB2490]

Quick little video I did about my settings and adjustments. working on a turbo responsiveness video showing the differences between level 1 2 3 and spoiler alert there's a difference in low and midrange and the boost curve. Subscribe to get some updates

 

[Tux_Integra]

Quick little video I did about my settings and adjustments. working on a turbo responsiveness video showing the differences between level 1 2 3 and spoiler alert there's a difference in low and midrange and the boost curve. Subscribe to get some updates

I'm surprised I haven't seen you on the road, I live by the area you do your driving videos.

 

[RB2490]

I'm surprised I haven't seen you on the road, I live by the area you do your driving videos.

where are you located. Ive seen a ton of Integras recently on the island. Ive seen a red one and a tons of carbons.

 

[Tux_Integra]

where are you located. Ive seen a ton of Integras recently on the island. Ive seen a red one and a tons of carbons.

I'm off Willis Ave. I have not seen any on the road.

 

[RB2490]

I'm off Willis Ave. I have not seen any on the road.

Ok so not too far from me.

Sponsored