What did you do to your Integra Type S today? 🙋🏻‍♂️

[TopazM3]

It just plugs into ob2 port I’m guessing you can use it with out a flash. Message Hondata I screen shot the list of this you can pick from

Looks good. What data can be displayed? My car is stock and I don’t have Hondata. I don’t want to mod the engine during warranty. Can Hondata ( or something else) be used to display data? If Hondata is on the car, with no actual modification to the engine, does this void engine warranty? I find it very annoying that Acura saw fit to deny us this basic info in a performance car.

[/QUOTE]

Thanks! Is oil temperature possible to display?

Sponsored

 

[Krazydan19]

Thanks! Is oil temperature possible to display?
[/QUOTE]
Whatever is on that list is

 

[StingertimeNC]

Thanks! Is oil temperature possible to display?

Whatever is on that list is
[/QUOTE]
No. No sensor in the car.

 

[nix6speed]

I made the mileage sequential. How neat is that? Pretty neat. #driveyourcivics

 

[SilverRocket]

I made the mileage sequential. How neat is that? Pretty neat. #driveyourcivics

Now do 123456

 

[SocalDE5]

Changed the oil (3k mil) with motul 8100.

Put a Stahlbus oil drain valve. Stahlbus stuff is really good. I put a bleed valve on clutch mc too. I may put some on calipers....

Acuity reverse hoses with spoon thermo.

Catch can with 2k mi on it. There is oil at the bottom. Hope the pic shows it. Worth it.

My 6month(ish) injector treatment. Overkill? Prob....I dunno. Does not hurt either way. I use this in all my cars. Peace of mind.

I enjoy reading numerous maint styles by all of you and they are not wrong. This is just mine. 3k miles... easy maint items... 6mos injector.....oil catch and.... a sensible cooling upgrade.
Here is my oil level drained w/filter.

Oh ya... rv6 rear set up...

 

[Justpassedu]

 

[StingertimeNC]

So what did you do? Red washers?

 

[Justpassedu]

So what did you do? Red washers?

Yes and the carbon skin on the fuse box. The intake was installed awhile back .

 

[gohan408]

Has anyone had experience with these types of kits? The stock shifter feels pretty good already, but I'm curious how a 30% reduction would affect an ITS/CTR shifter, which is already quite crisp. Thoughts?


https://www.sirimoto.com/p/mm/acura/integra/sirimoto-krispy-shift-kit.html

 

[Integra23]

Has anyone had experience with these types of kits? The stock shifter feels pretty good already, but I'm curious how a 30% reduction would affect an ITS/CTR shifter, which is already quite crisp. Thoughts?


https://www.sirimoto.com/p/mm/acura/integra/sirimoto-krispy-shift-kit.html

I would lean this way over the hybrid offering.

 

[gohan408]

I would lean this way over the hybrid offering.

I agree, plus after trying out the HR SS for the s2k it didn't feel $400 better.

 

[egxflash]

Got that whoosh whoosh courtesy of @lmtlsauto

 

[TEPTeggy]

Installed PRL rear motor mount this weekend. So far there is slightly more vibration at idle and around 3k rpm, which is to be expected and hardly noticable after a day. While creeping forward or reverse, I do feel a lot more vibrations. I'm hoping the mount will break in and the vibrations will go down a little bit, but as of now I don't find it a nuisance for my personal tastes and I feel more connected to the car.
The best part is that the wheel hop is completely gone, and I don't feel bad for ringing it all the way out in first gear anymore.

 

[jquelch]

Just got home from Pike’s Peak. Drove my Type S up to Devils Playground to watch the race. Several hours of stop and go traffic up hill made for a very long morning and a very sore leg.

Saw the two Integra‘s at fan fest and on the course. Kinda want the hood from the Type S race car.

Sponsored