Sponsored
Ambient Lighting
- Thread starter EasyPickins
- Start date
- Watchers 19
StormtrooperTK421
Senior Member
- First Name
- Jeff
- Joined
- Jan 29, 2023
- Threads
- 7
- Messages
- 55
- Reaction score
- 35
- Location
- Portland, OR
- Car(s)
- 2023 Integra A-Spec Tech
So I installed the red LEDs for the ambient lighting strip last night and they are SUPER dim...much dimmer than the stock white one. They are nothing like the pictures earlier in the thread. Has anyone else experienced this? I double-checked the part numbers and followed proper install. The light settings are maxed out as well.
JC-RH
Senior Member
What is the part number you installed?
Keep in mind they only turn on when the headlights are on. During nighttime driving, mine are pretty bright. I have the ones from the Civic Type-R footwell.
StormtrooperTK421
Senior Member
- First Name
- Jeff
- Joined
- Jan 29, 2023
- Threads
- 7
- Messages
- 55
- Reaction score
- 35
- Location
- Portland, OR
- Car(s)
- 2023 Integra A-Spec Tech
The part number I ordered was correct and I had the car running when I tested the lights. I found the problem...
When you pull out the stock LED, there is a black piece attached to it that you have to remove and install on the new, red LED in order to guide the tail end of the LED strip directly up to the LED. When I removed the stock LED, I broke off this small piece of plastic INSIDE of the black piece. I had to completely remove the door panel and pry open that LED mechanism so I could superglue that piece back on. Once I had done this (with extreme difficulty), everything worked beautifully!
Hopefully this helps someone in the future! Below is the piece in question and the before (broken install) and after (superglued and fixed install). I LOVE them.
Sponsored
JC-RH
Senior Member
Glad you figured it out. One of my doors was very easy to do. The other side, the clear stick piece you speak about was sticking out a bit. It made it hard to slide out the cover that needs to be transferred over. Had to bend it a tad to slide it out.
In the end, great mod that brings the interior to life. Highly recommended to everyone.
In the end, great mod that brings the interior to life. Highly recommended to everyone.
OEMjoe
Senior Member
For those installing JDM Honda Access parts like the lighting, they may come with a wiring harness. I had to tap into my traction control switch for the floor footwell lights, including the one in front and an additional one under the seat.
I started taking photos but gave up on the documentation partway through. The instructions were only in Japanese, and everything was for RHD!
I started taking photos but gave up on the documentation partway through. The instructions were only in Japanese, and everything was for RHD!
Last edited:
bpebler
Senior Member
Is this the stuff from Blackhawk Japan? I was looking at some of their stuff as well. They have the under seat, center cup holder, door cup holder area and somewhere else I thought. Would be really cool! I figured just had to tap into different existing wiring.For those installing JDM Honda Access parts like the lighting, they may come with a wiring harness. I had to tap into my traction control switch for the floor footwell lights, including the one in front and an additional one under the seat.
I started taking photos but gave up on the documentation partway through. The instructions were only in Japanese, and everything was for RHD!
RUNN1N
Senior Member
Those are they--installation is a bit tricky because the instructions are specific to the RHD version of the FL5, so plan on a potentially long/slow process with a multimeter. Personally, I think the outcome is worth the trouble.
bpebler
Senior Member
Oooooo yes I'd have to agree, looks worth it to me lol even for me having mine a tad dimmer than most - the red still makes a big differenceThose are they--installation is a bit tricky because the instructions are specific to the RHD version of the FL5, so plan on a potentially long/slow process with a multimeter. Personally, I think the outcome is worth the trouble.
Sponsored
bpebler
Senior Member
I love this! And thanks for sharing. I'd like to add some lighting in the rear as well. Did you share any photos or tips about it on here already? Or maybe it's on the CTR forum?
Older boy likes to read on trips and our 2021 Ram Laramie WITH the sunroof had overhead dimmable ambient lighting and then we went to a 2022 Ram Limited (higher trim) WITHOUT sunroof and no more overhead rear lighting. Didn't make any sense. But we miss having it.
In the meantime I've just added several layers of red brake light vinyl over the interior lights which was awesome - but it keep losing adhesion and those lights in particular get really hot and have been burning through the vinyl. My passenger side has a loose connection too and isn't working so I have to mess around with it one of these days.
bpebler
Senior Member
Same here, but getting slightly better at it lolI'm good for photos and proof that it's doable, but I'm terrible about documenting problems/solutions as I go.
That looks amazing!! So you basically order 2 sets of the door cup holder area and a set for the front handles and added them both to the rear as well? This looks really rad.
SlippyFist
Senior Member
- Joined
- Oct 21, 2023
- Threads
- 21
- Messages
- 347
- Reaction score
- 203
- Location
- East Coast
- Car(s)
- '24 Integra Type S
i've been waiting to see if any good ambient lighting mods come out for the DE5. the ambient lighting we get from the factory is such a joke i don't understand why acura even bothered. a couple of bare white LED strips that don't change color or do anything? what a joke. this type of LED technology is dirt fucking cheap. i get it, we can't have the same exact ambient lighting that the TLX-TS got because we can't have the same feature on 2 different cars or something
but we definitely deserved a little bit better than this lol
but we definitely deserved a little bit better than this lolSponsored
