What did you do to your Integra Type S today? 🙋🏻‍♂️

[TAEGEUK_DE5]

Just had to add decals for my company..

Sponsored

 

[mopar_man]

The Mugen knob gets a little cold this time of year so I added a hoodie

 

[6ix_Teggy]

Worked on the interior a bit

Recaro Jersey Red Pole Positions
Carismo Design Alcantera Steering Wheel
Spoon Shift Knob
Overland Design Alcantera Centre Storage Cover
FL5 OEM Interior Lighting Swap

 

[ghostkp]

Worked on the interior a bit

Recaro Jersey Red Pole Positions
Carismo Design Alcantera Steering Wheel
Spoon Shift Knob
Overland Design Alcantera Centre Storage Cover
FL5 OEM Interior Lighting Swap

Nice! Do those have heated seats?

 

[whtciv2k]

The Mugen knob gets a little cold this time of year so I added a hoodie

Just got mine yesterday

 

[StingertimeNC]

Worked on the interior a bit

Recaro Jersey Red Pole Positions
Carismo Design Alcantera Steering Wheel
Spoon Shift Knob
Overland Design Alcantera Centre Storage Cover
FL5 OEM Interior Lighting Swap

Talk to me about wiring stuff regarding airbag lights, seat position sensors and the like? Did you do anything there or are you just ignoring the light?

 

[6ix_Teggy]

Nice! Do those have heated seats?

No heated seats

 

[6ix_Teggy]

Talk to me about wiring stuff regarding airbag lights, seat position sensors and the like? Did you do anything there or are you just ignoring the light?

Right now I just have installed with airbag lights.

Threre is a workaround to clear the lights, which I will be getting around to in the summer. For driver side its just a 2.2 Resistor plugged into the factory harness, for passeneger side its a bit more complicated as it uses weight sensors. Will need to custom make a rail which can house the factory weight sensors and house between the bottom base and PCI rails. This should clear the Air bag lights.

 

[whtciv2k]

Installed a nice dead pedal

 

[ender_ong]

Right now I just have installed with airbag lights.

Threre is a workaround to clear the lights, which I will be getting around to in the summer. For driver side its just a 2.2 Resistor plugged into the factory harness, for passeneger side its a bit more complicated as it uses weight sensors. Will need to custom make a rail which can house the factory weight sensors and house between the bottom base and PCI rails. This should clear the Air bag lights.

For the driver side: in case you still get the SRS light from using the 2.2 ohm resistor to defeat the side airbag, you might also have to plug in the seat belt buckle wire and also the seat position sensor. I plugged both of those in along with my SRS delete wire and I don’t have the SRS light on

 

[whtciv2k]

Illuminated door sills installed!

 

[StingertimeNC]

For the driver side: in case you still get the SRS light from using the 2.2 ohm resistor to defeat the side airbag, you might also have to plug in the seat belt buckle wire and also the seat position sensor. I plugged both of those in along with my SRS delete wire and I don’t have the SRS light on

Is it a pain to get the seat position sensor off of the seat rail?

 

[ender_ong]

Is it a pain to get the seat position sensor off of the seat rail?

no, not a pain to take off seat position sensor. It’s 2 x 10 mm bolts, one to take the bracket off from seat (helps to unclip/move aside the big side trim piece that has the seat adjustment buttons, that’s the side the sensor is on), then the other bolt that attaches sensor to bracket. The pain is that the sensor wire is attached to the big ass bundle of all the electric wires for the seat. I had to cut the bundle that snakes into the seat (unreachable connectors, for the lumbar and seat back tilt). I bought another extra whole seat wiring harness ($100) to cut up specifically just for this application, will re-splice old cut up harness and attach to stock seat. Will keep you updated on that

 

[StingertimeNC]

Hey, thanks for this. I'm not sure I have the desire to go all the way down this road.

 

[whtciv2k]

Installed the blacked out badges all around. Found a way to install the front A emblem with the front bumper only partially removed.

Sponsored