Sponsored


Yokohama Advan GT Beyond 275/35/19

Underdog

Member
Joined
Aug 11, 2024
Threads
1
Messages
47
Reaction score
43
Location
Massachusetts, USA
Car(s)
‘24 ITS, ‘06 Legacy GT
Here are some pics of mine 19s in Racing Titanium Black
IMG_4786.jpg
IMG_4797.jpg
This looks great. No issues at all with the 275/35-19 and +45 at stock height? I went with a +51 wheel and am also keeping the car stock height for the time being. I like how the 35 profile fills the wheel arches, and gives more protection against crappy roads.
Sponsored

 

Scrodee

Member
Joined
Dec 8, 2023
Threads
3
Messages
27
Reaction score
11
Location
CSRA
Car(s)
'24 ITS in LCM
I can't find the weights on the Advan wheels. What was the weight on this setup?
 

StingertimeNC

Senior Member
First Name
Tim
Joined
Sep 19, 2023
Threads
12
Messages
998
Reaction score
834
Location
NC
Car(s)
2024 Integra Type S
275/30 will be a closer fit to stock outer diameter and they will fit fine. 275/35 will definitely fit on the rim but the sidewalls will be and additional 16.75mm tall or 2/3rds of an inch. Will throw off the speedo but would probably look good and meaty.
 

Sponsored

PLovin80

New Member
Joined
Sep 9, 2024
Threads
0
Messages
2
Reaction score
0
Location
Virginia
Car(s)
2024 Integra Type S
@notorious9i6 Do you think 265/35 19x9.5 +38 would fit with eibach sportlines (1.2" front, 1" rear drop)? Essentially its a more aggressive drop than the h&r's with 7mm more poke than your +45 offset.
 

StingertimeNC

Senior Member
First Name
Tim
Joined
Sep 19, 2023
Threads
12
Messages
998
Reaction score
834
Location
NC
Car(s)
2024 Integra Type S
^^ I want to know this!! Would love to go 275/35 19, with drop and +45 offset.
 

Sponsored

PLovin80

New Member
Joined
Sep 9, 2024
Threads
0
Messages
2
Reaction score
0
Location
Virginia
Car(s)
2024 Integra Type S
265/35 19x9.5 +38 ... Mathwise it should fit.

For sure 275/35/19 +35 will rub in the rear.
Thanks for the reply. I feel a bit better now. Your post is very helpful for comparison.

265 is a bit short and narrower than 275, which is good for my clearance, but the extra 7mm (0.3") poke and being about half an inch lower is concerning me.

Do you feel if your wheels stuck out another 7mm and you were half and inch lower, you would still clear the outer fenders without rubbing?

Also, my camber is -2 front and -2.5 rear.
 
 



Top