What did you do to your Teggy today? 👨🏻‍🔧🧰🚿🛠

[BKK Jack]

It took a while for the hatch mat to come out. I got the cabin ones first and had to wait a month or so before it to be available.

Sponsored

 

[Integra23]

Yeah I'm running tuxmat yo front and the aspec liner in rear. But the factory liner is kind cheap a rigid I bet the tuxmat offering is better

 

[arod19863]

I have not.

Are your tires messing up at all with out the rear camber kit or did it just not need the camber kit I practically got the same spec wheels 19x8.5 with a 30+ offset but Im trying to figure out if it needs camber or not

 

[BKK Jack]

If I'm not mistaken, with a small drop - like with the Eibach Pros - the camber wouldn't be much farther off than if you drove around with a bit of weight in the hatch. If you never put anything in the hatch, it probably wouldn't be that much of an issue, especially if you rotated your tires regularly.

However, putting a bunch of stuff in that hatch for something like a trip, then driving a few thousand miles...

 

[arod19863]

If I'm not mistaken, with a small drop - like with the Eibach Pros - the camber wouldn't be much farther off than if you drove around with a bit of weight in the hatch. If you never put anything in the hatch, it probably wouldn't be that much of an issue, especially if you rotated your tires regularly.

However, putting a bunch of stuff in that hatch for something like a trip, then driving a few thousand miles...

Do you happen to have the ebach springs without the camber arms I already have the springs but if I dont need the springs it will definitely save me some money

 

[BKK Jack]

Do you happen to have the ebach springs without the camber arms I already have the springs but if I dont need the springs it will definitely save me some money

I do not. I'm waiting to get my hitch installed to see if I have enough room to drop it a bit without scraping every driveway apron I come across.

 

[BKK Jack]

Tomorrow, I will be towing the track bike to its new owner. Those funds will be used to upgrade the clutch. Then a KTuner/Phearable will be added.

Still on the fence about the springs. With the trailer attached, I have about 2.5" between the hitch and my driveway apron at the hitch's lowest point. If the Pro kit only drops the rear 1" and the spring rates are about the same as the stockers, I should be good.

I ordered a Stage 1 (20S) clutch upgrade kit from Action Clutch this morning. If you are/were in the military or a first responder, you can get a 20% discount if you have an account with GovX.com. Just click the icon at the bottom of the cart window and enter your GovX credentials.

 

[DaNuKidd]

Installed the hybrid racing cable bushings, base bushings along with the sirimoto shift level bushing. Swapped out the acuity shift collar for the hybrid racing shift collar as well. The shift feel is much more mechanical now all of the play in the shifter is virtually gone.
Also wrapped the piano black. Pics below

 

[Ap2Iven]

Eibach Lowering Springs and some Garage Line Wheel Spacers. The rears took 15 minutes to do both but the fronts kicked my a$s.

 

[BKK Jack]

Yesterday, I picked up my car from getting the clutch upgraded to the Action Clutch Stage 1 (20S) and Sirimoto CMC damper delete. Initial impressions were HOLY SHIT, that's a stiff clutch pedal. When I went to start the car, I thought I'd mistakenly put my left foot on the brake pedal, or maybe they'd left a sandbag behind it or something.

It didn't take long for me to start getting used to it, and if it means I can fully use the tune I'm going to put on it (just the Phearable) and tow my bike through the Smoky Mtns without worrying about burning it up, it's well worth it.

I don't know if the pedal effort for their Stage 1 (10S) is the same or less than the 20S, but if you are interested in upgrading with their products, it might be worth asking them. Had I known the change was going to be that drastic, I probably would have gone with the 10S.

 

[SeanIsElsewhere]

Eibach Lowering Springs and some Garage Line Wheel Spacers. The rears took 15 minutes to do both but the fronts kicked my a$s.

Can you link the spacers you used? What mm size? Car is looking great!

 

[Ap2Iven]

Can you link the spacers you used? What mm size? Car is looking great!

these are the part numbers and the vender sells em in pairs. So one of each part number. Did a bunch of research on reviews due to being worried in buying an Amazon/eBay brand and having studs snap when the car is at the track.
GarageLine.com

 

[SeanIsElsewhere]

these are the part numbers and the vender sells em in pairs. So one of each part number. Did a bunch of research on reviews due to being worried in buying an Amazon/eBay brand and having studs snap when the car is at the track.
GarageLine.com

Cool thanks man!

 

[SharpAndy]

I did a thing! PRL rear strut bar installed. It looks so good, and makes a slight, but noticeable difference in chassis rigidity. I did install the front star brace a few weeks ago was impressed with the difference it made, so figured I'd get the rear!

 

[JohnV]

rear strut bar

I did not know that was a thing! Thanks for sharing.

Sponsored