What did you do to your Integra Type S today? 🙋🏻‍♂️

[SocalDE5]

Yeah, while bleeding the clutch isn't technically required while bleeding the brakes, it's certain wise to do so. Better fluid there makes a decent difference.

Agree 100%!

Did you do the CMC bypass and CDV delete while you were in there?

I did not. I am on the fence with those two mods. I know there is a better feel with the whole clutch package done.
I am just undecided at the moment.

But to be honest.... I was on the fence with the cluth line and I just installed it

Sponsored

 

[PrecordFK7]

Swapped my PRL HVI and Turbo Inlet Pipe for Infinity Design matte carbon bits. I didn't like how there were 8 hose clamps and so many joints with the PRL setup vs just one joint and 2 clamps. Looks much nicer now too as a plus.

 

[Underdog]

Swapped my PRL HVI and Turbo Inlet Pipe for Infinity Design matte carbon bits. I didn't like how there were 8 hose clamps and so many joints with the PRL setup vs just one joint and 2 clamps. Looks much nicer now too as a plus.

How was the install process? I've read a few accounts of slight modifications needed to fit.

 

[PrecordFK7]

How was the install process? I've read a few accounts of slight modifications needed to fit.

I did see others talk about the issues and I had the same/similar issues. Doesn't seem to like the Acuity reverse flow hoses and/or CSF Radiator and I couldn't use the forward bracket on the underside or that mounting point. Re-using the OEM EPDM coupler presented some challenge as the openings are different sizes and it was tough to fit the smaller side onto the pipe.

Besides that, the rest was smooth and didn't run into any issues with the hood/opening duct seal like others noted. Didn't expect any improvements vs the PRL HVI but the datalogs show is more efficient and likely making more power.

I already foresee It will be a pain to do the transmission fluid fill in the future compared to doing it with the PRL HVI setup.

 

[Doskiller]

I greased the inside of the OEM coupler and it made things somewhat better for the install ..........

 

[jaypinto]

Swapped my PRL HVI and Turbo Inlet Pipe for Infinity Design matte carbon bits. I didn't like how there were 8 hose clamps and so many joints with the PRL setup vs just one joint and 2 clamps. Looks much nicer now too as a plus.

Do you feel any difference in terms of throttle response or power?? I think the manufacturer was claiming a 14 whp increase but that seems hard to believe

 

[PrecordFK7]

Do you feel any difference in terms of throttle response or power?? I think the manufacturer was claiming a 14 whp increase but that seems hard to believe

Feels pretty similar to the PRL HVI, except now the car is having trouble with traction in 3rd gear from a roll at 2500rpm. I'll need to throw it back on the dyno to see exactly how much the change from PRL to Infinity is in whp. It's definitely flowing more/less restrictive and the boost is up a little bit with the Infinity setup.

 

[1tointegra]

Met up at @Unity Performance for parts pickup

 

[TwinSkrullDesign]

Got my car back from my buds detail shop.

- paint correction
- Xpel Clear PPF hood, fenders and front bumper
- Xpel Gloss Black PPF on roof and side-view mirrors
- Xpel ceramic coating

Now she goes back into hibernation until April / May…who knows, Wisconsin sucks.

Next project is having custom Recaro CS seats made for the Type-S. I’ll probably have them in late spring / early summer.

 

[StingertimeNC]

LCM is such a good color, especially when clean. Really plays with the light.

 

[Integra23]

LCM is such a good color, especially when clean. Really plays with the light.

For some reason I agree with you

 

[ender_ong]

installed schroth quick fit pro harness for ford focus g3. Nice option for those that want a harness without a full roll cage or harness bar.

I referenced these sites while researching:

-CivicX HPDE Harness
-CivicX 4-Point Harness without Bar
-CivicX 4-point harness for track days or more seat security

purchased from evasive motorsports:
-Product Link

really happy with it, I feel glued to the recaro seat. I am aware of and fully accept all risks warned by schroth by using this harness with this seat and this car

If anyone decides to go this route, I have pointers and tips to help with the installation process, which wasn’t too bad but lessons-learned always helps

 

[gohan408]

excited for Spring

 

[miksfield]

installed schroth quick fit pro harness for ford focus g3. Nice option for those that want a harness without a full roll cage or harness bar.

I referenced these sites while researching:

-CivicX HPDE Harness
-CivicX 4-Point Harness without Bar
-CivicX 4-point harness for track days or more seat security

purchased from evasive motorsports:
-Product Link

really happy with it, I feel glued to the recaro seat. I am aware of and fully accept all risks warned by schroth by using this harness with this seat and this car

If anyone decides to go this route, I have pointers and tips to help with the installation process, which wasn’t too bad but lessons-learned always helps

Ooh I would love to see an installation process on this! I was thinking of doing this at some point because the side bolsters on the stock seats are so shitty.

 

[StingertimeNC]

installed schroth quick fit pro harness for ford focus g3. Nice option for those that want a harness without a full roll cage or harness bar.

I referenced these sites while researching:

-CivicX HPDE Harness
-CivicX 4-Point Harness without Bar
-CivicX 4-point harness for track days or more seat security

purchased from evasive motorsports:
-Product Link

really happy with it, I feel glued to the recaro seat. I am aware of and fully accept all risks warned by schroth by using this harness with this seat and this car

If anyone decides to go this route, I have pointers and tips to help with the installation process, which wasn’t too bad but lessons-learned always helps

Is this the harness that behaves like a three point seatbelt in that one of the shoulder straps gives way so your torso can twist a bit? If so, This was recommended to me by one of the track instructors.

I would also like all the details on the install.

Thanks very much!

Sponsored